My Mig Welding Station

[HAP]

Just added a 3/4" steel top which replaced a much thinner stainless top. The old top used to be a floor drain cover which had drain slots made into it. I wanted the top to be removable. Dont plan on doing any hammering on it. I'm thinking of making some kind of screen as a lightweight spater back stop, not sure yet.
I also finished my articulating arm welding station light. It extends to about 6.5 feet and consists of 4 48" T5 54w HO 6500K bulbs. It's quite bright and best of all there are no cords or light stands to trip over. And they are not hot like hologens. Was a fun project.
Regards,
HAP
http://i890.photobucket.com/albums/a...P/DSCN5880.jpg
http://i890.photobucket.com/albums/a...P/DSCN5881.jpg
http://i890.photobucket.com/albums/a...P/DSCN5882.jpg
http://i890.photobucket.com/albums/a...P/DSCN5884.jpg
http://i890.photobucket.com/albums/a...P/DSCN5885.jpg
http://i890.photobucket.com/albums/a...P/DSCN5888.jpg

[oldtiffie]

HAP

I cannot open any of your posted *DSCN5*.jpg files in PhotoBucket. I keep getting this PB message ".

Page not found

But now that you're here, go ahead and search through the billions of photos, images and videos on Photobucket.

.

I can access my PB file/s OK.

[EddyCurr]

http://i890.photobucket.com/albums/a...P/DSCN5880.jpg
http://i890.photobucket.com/albums/a...P/DSCN5881.jpg
http://i890.photobucket.com/albums/a...P/DSCN5882.jpg
http://i890.photobucket.com/albums/a...P/DSCN5884.jpg
http://i890.photobucket.com/albums/a...P/DSCN5885.jpg
http://i890.photobucket.com/albums/a...P/DSCN5888.jpg

This should work better for folks ...

[oldtiffie]

Thanks Eddy - its all OK now.

Nice work HAP.

[sasquatch]

Hap what does the top plate weigh?

Thanks for posting the great pics.

[12teethperinch]

I like the swing arm for the light over the bench, I am going to do something similar for a fume extractor. Nice big clean garage you've got there.
Darrell

[HAP]

Hap what does the top plate weigh?

Thanks for posting the great pics.

Something like 203 pounds.

[JoeLee]

Thats a nice piece of plate..... is that stainless.
Nice fly swatter too. Good place to hang it too. There is too much open space in your shop, I get dizzy looking at it.

JL.................