Need info on Radnor products

[Dr Stan]

I have a line on an Airco 250 amp AC/DC power supply, which I think is one of the ones built by Miller. The serial number is JG139964 if anyone has access to the Miller data base. The current owner wants $275 for the unit, but it is not set up for TIG welding.

I found a water cooled Radnor TIG torch kit at Airgas for about $150 less than a similar Weldcraft unit. On a welding site there was some discussion about Radnor products and it seems to be the house brand for Airgas. Does anyone know if Radnor products are American or Chinese made?

I'm also open to suggestions/comments on other American made brands of torches.

[gnm109]

I have a line on an Airco 250 amp AC/DC power supply, which I think is one of the ones built by Miller. The serial number is JG139964 if anyone has access to the Miller data base. The current owner wants $275 for the unit, but it is not set up for TIG welding.

I found a water cooled Radnor TIG torch kit at Airgas for about $150 less than a similar Weldcraft unit. On a welding site there was some discussion about Radnor products and it seems to be the house brand for Airgas. Does anyone know if Radnor products are American or Chinese made?

I'm also open to suggestions/comments on other American made brands of torches.

Radnor products can come from various places. I bought a roll of their MIG wire some time ago and it was marked Made in Turkey. I recently replaced an acetylene regulator on my OA outfit that was assembled in Mexico. I'm sure that some of itheir products come from China, however. A check of the package should tell you.