J+S 540 Voltage question?

[sdeering]

I will PM you tomorrow.

[small.planes]

I have the manual mark scanned at work. Will dig it out tomorrow if anyone wants it.

Dave

[wern]

R.C.

I have a later model 540, and am very interested in the coolant
trough on your grinder as mine came with out it, I was wondering
how the coolant got back into the tank, any chance of some photos
of the trough and how it is attached.

Werner

[.RC.]

Photo's here

http://smg.photobucket.com/albums/v6...man%20Grinder/

[sdeering]

Hey nice picks RC.

On the first pick of the coolant tank there is a piece in the far left upper tank I have 2 of these but I dont know what they are for?
I also have a coal shovel type whatchamado that looks like its used to scrape grindings out of the tanks. I have a rod, has a slight bend in it, you know what its for.

Side note I remove my magnet and what a mess under it. I cleand it up, groud the table and both sides of the magnet. Oiled and bolted down ready to do some work. YAY.

Stephen

[.RC.]

They would be skimmers I think.... The liquid going from one section to the next would come from underneath the surface, so any crud floating on top will not move from tank to tank..

[wern]

Thanks R.C. for the detailed pictures, from these I can make the trough.

Werner

[aboard_epsilon]

Photo's here

http://smg.photobucket.com/albums/v6...man%20Grinder/

quickly detachable hopefully ..because you loose about 4 inches of travel when thats in the way .

all the best.markj

[sdeering]

Thanks RC.

[.RC.]

quickly detachable hopefully ..because you loose about 4 inches of travel when thats in the way .

all the best.markj

4 inches travel from where? Does not seem to lose any....