L00 spindle

[John Stevenson]

Can some kind soul rush out and let me know the diameter of the Nut on an L00 spindle please?

Got to do a drawing for the C spanner to be laser cut out.

Just need the OD and the width of the slot. Had a look on the net, loads of dimensions but none give the nut OD.

Many thanks.

[lazlo]

Can some kind soul rush out and let me know the diameter of the Nut on an L00 spindle please?

Not sure what Brits mean by "rush" John, but if you can wait 'till I get off work, I can take some measurements in 3 hours or so

[John Stevenson]

Can't you finish early ?

[Forrest Addy]

Right up my alley: I have the USAS B5.9 here in my hand.

Working from Table 30 "Drawnuts for Type L Spindle Noses."

Verbal description. OD 4 5/8, Thread 3 3/4-6 UN, Width 1 3/16, driving slot 1/2, Slot depth 3/16 (0.030 r in slot corners)

Got an eMail? I can send you the page.

[John Stevenson]

Right up my alley: I have the USAS B5.9 here in my hand.

Working from Table 30 "Drawnuts for Type L Spindle Noses."

Verbal description. OD 4 5/8, Thread 3 3/4-6 UN, Width 1 3/16, driving slot 1/2, Slot depth 3/16 (0.030 r in slot corners)

Got an eMail? I can send you the page.

Magic.
john [ at ] stevenson-engineers.co.uk

usual change to a @

Thanks forrest.

[Forrest Addy]

Magic.
john [ at ] stevenson-engineers.co.uk

usual change to a @

Thanks forrest.

What's the "Magic." Is that part of your eMail?

[John Stevenson]

No magic as in Awesome, your the dude etc. brit speak for Jolly good show

[Forrest Addy]

Way cool.

[Rich Carlstedt]

FYI
My Clausing L00 has a 4.875 O.D. Nut with .50" diameter holes.
I realize it is not the slotted one that John asked for, but there may be some manufacturing differences ?

Rich

[armedandsafe]

First glance at the title and I wondered why in the world one would want a spindle in the loo.

(Yes, as a matter of fact I am still ignorant on much of this stuff. )

Pops