Results 1 to 2 of 2

Thread: Jones and Shipman 540 Washer

  1. #1

    Default Jones and Shipman 540 Washer

    Hi

    I am making some grinding wheel holders for a J & S 540.

    There is a special washer which goes on the J & S 540 wheel flanges which stops the wheel rotating off. It has 2 catches on the internal diameter which engage on two slots.

    Could someone please give me the OD and thickness of this washer

    Thanks

  2. #2
    Join Date
    Dec 2006
    Location
    Rugby, Warwickshire, England
    Posts
    555

    Default

    The OD is the same as the wheel flange. The thickness is whatever bit of sheet metal you've got lying about. I've got one that's about 20gauge, Another one that's 1/8" and one that's 1/8" rubber.

    Shouldn't matter, since the threads are left hand and the wheel won't rotate off under load.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •