The plan is to send each subscriber $100,000 as a commemoration gift.
I'm sure everyone will cherish it & hold onto it for a long time.
My ATM limit is something like $240 a day so I'm still working on subscriber #1. Your patience is greatly appreciated!
Thanks to Tonys latest video I realized that its easier to use tapered mill to cut the insert pockets than twist the milling machine to imaginary angles.
Spent some time thinking how to grind it after realising that 15-degree pcb engraving tool is very close what I need. 15-degrees is close enough resulting in 7.5 degree pocket, pretty close to 7 degree inserts.
10pcs 15-degree carbide engravers for 3 dollars from ebay it is...
Okay, I'm not as familiar with these cartoon characters as most of you seem to be. I got Adam Booth, John Saunders and Stefan Gottswinter but who are the rest? Is Tom Lipton the one with a pencil on his ear? The rest I'm clueless.
NYC CNC guy, Keith Rucker, Basement shop guy?, Adam B, Stefan G and a unnamed actor from Star Trek, the one that gets killed in every episode.
Adam Booth, Abom79
Tom Lipton, Oxtoolco
Chuck Bommarito, Outside Screwball
Brad Jacobs, BasementShopGuy (Maple Lane Machine & Tool)
John Saunders, NYC CNC (Saunders Machine works)
ha! i read that 20 minutes ago and i'm still laughing.
Originally Posted by loose nut
Well, I'm a fan and a subscriber, too. I just love how you managed to take those nice shavings from the D3 with a hand-held block plane!
Originally Posted by Tony
Hey Tony! Congrats!
New member here and wanted to make this my first post. I watch all the regulars on YT, and some not so much. Yours are by far the most entertaining and informative.
Keep up the good work!