Results 1 to 2 of 2

Thread: Torch and handle fit

  1. #1
    Join Date
    Jun 2015
    Location
    Van Alstyne Texas
    Posts
    22

    Default Torch and handle fit

    I have a victor j100c handle and a ca1260 torch both with coupling threads problems. First will they work together and are they worth the repair.

  2. #2
    Join Date
    May 2016
    Location
    Michigan
    Posts
    208

    Default

    I have a similar handle,( but Airmark) about 20 years old and it needs recondition, new O-rings and flash arrestors etc.
    Also my regulators are starting to drift and the hoses are cracking at the handle end.
    I just inquired at local welding supply about a general recondition.
    Verbally the recondition price per regulator is about $65 and the handle is about $70.
    The set is sent away and it takes about 2 weeks.
    A new set like mine is over $400 they said.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •