Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Buck chuck in search of ID hard jaws.

  1. #11
    Join Date
    Dec 2018
    Location
    Georgia
    Posts
    10

    Default

    Update on this the jaws they sent me were the wrong ones and the ones I need are no longer available so I’m back to square one with a few hundred dollars in jaws I have to send back.

  2. #12
    Join Date
    Mar 2005
    Location
    Peralta, New Mexico USA
    Posts
    911

    Default

    I have an older 5" 6 jaw Buck - a 2561. The more common is the later 2562. I'm looking for an inside jaw set for the 2561.

  3. #13
    Join Date
    Mar 2008
    Location
    Kent, U.K.
    Posts
    2,465

    Default

    Put up the relevant dimensions, someone might have them.
    Peter - novice home machinist, modern motorcycle enthusiast.

    Denford Viceroy 280 Synchro (11 x 24)
    Herbert 0V adapted to R8 by 'Sir John'.
    Monarch 10EE 1942

  4. #14
    Join Date
    Mar 2005
    Location
    Peralta, New Mexico USA
    Posts
    911

    Default

    Quote Originally Posted by Peter. View Post
    Put up the relevant dimensions, someone might have them.
    It's worth a try (sorry for the crappy drawing, not to scale, do not dimension from drawing):


  5. #15
    Join Date
    Dec 2018
    Location
    Georgia
    Posts
    10

    Default

    Is that a inside jaw in the picture?

  6. #16
    Join Date
    Mar 2005
    Location
    Peralta, New Mexico USA
    Posts
    911

    Default

    Quote Originally Posted by 8890joe View Post
    Is that a inside jaw in the picture?
    I wrote a response that said that these were OD jaws, but when looking for a nice image with a description it said that these were ID jaws. Anyway, from https://www.carbideanddiamondtooling...cscujspbb-.jpg there's this:



    saying that these were ID solid jaws. By this definition I need OD solid jaws and have ID solid jaws. I'd look a decent condition set of ID jaws if they were offered as one of these has a little bitty slot cut in it, not enough to affect work by kind of annoying. Also, the Buck 2561 jaws are very different from the 2562 and later jaws.

    I think I've been confused about the ID/OD jaw definition for about 20 years. I guess I was going by the primary use of the ID jaws grabbing the OD of smaller diameter work. Anyway, that's my excuse and I'm sticking to it.

  7. #17
    Join Date
    Mar 2008
    Location
    Kent, U.K.
    Posts
    2,465

    Default

    Don't worry the TOS website has it backwards too.
    Peter - novice home machinist, modern motorcycle enthusiast.

    Denford Viceroy 280 Synchro (11 x 24)
    Herbert 0V adapted to R8 by 'Sir John'.
    Monarch 10EE 1942

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •