Results 1 to 4 of 4

Thread: What's the difference in these 2 tool holders?

  1. #1

    Default What's the difference in these 2 tool holders?

    Hi,
    I recently got a AXA-100 QCTP, wedge type. this is a import item. There is 2 different holders that look the same. part number 250-101 and 250-102.
    They look the same to me. One says for turning and facing. The other says for turning, facing, and boring.
    Whats the difference?

  2. #2
    Join Date
    Aug 2009
    Posts
    5,916

    Default

    Without a picture I'm not sure what you're talking about. Maybe the one that says boring has a v groove machined in it to hold a round boring bar.

    JL.....

  3. #3
    Join Date
    Jan 2010
    Location
    Kansas City area
    Posts
    5,558

    Default

    Yep. The 101 has a flat bottom for square tool shanks and the 102 has a v groove in the bottom to hold a round shank tool. There is enough flat on either side of the groove for a square shank as well.

  4. #4

    Default

    Ahh, that was quick!!
    I got a square bit in both of these, a left, and a right tool.
    I just looked and saw the groove you talking about.
    I been wanting to order extras of this to make a dedicated left/right/boring/etc./etc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •