Results 1 to 2 of 2

Thread: Oil seal questions.

  1. #1
    Join Date
    Jun 2011
    Location
    Northeast, PA
    Posts
    1,230

    Default Oil seal questions.

    Will a standard (oil) lip seal work to seal water? There should be no real pressure behind it and will not be submersed in water. This would be a seal for a jack shaft coming through the side of a tank that has a pressure washer inside running. There will be no direct blast from the pressure washer on it and should just see what ever water is blowing around inside the tank from it.

    Maybe a regular PTFE packing seal would be a better option although I have no real experience with them and how to gauge tolerances/clearances when making a housing to hold it.

  2. #2
    Join Date
    Sep 2006
    Location
    Southwestern Ontario, Canada
    Posts
    5,482

    Default

    Shouldn't matter if it is water (or anything else) as long as the manufacturer rates it for that use. A packing gland should work too.
    The shortest distance between two points is a circle of infinite diameter.

    Bluewater Model Engineering Society at https://sites.google.com/site/bluewatermes/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •