Announcement

Collapse
No announcement yet.

Ubuntu and Linuxcnc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    In your Bios just keep turning things on and off till you get the right latency numbers. If you can find Hyperthreading and power management
    you are almost there. 2 of my old desktops would not let me turn things off in the Bios and thus became useless for Linuxcnc.
    You also have to turn off hibernating and fan always on or you have to disconnect the fan and run it with a Wallwart.

    Comment

    Working...
    X