Announcement

Collapse
No announcement yet.

FS - 36" Bridgeport in Boston Area

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • FS - 36" Bridgeport in Boston Area

    The owner is retiring and used to do a fair bit of work for the university labs - mostly in platic.

    I picked up a mill from him this weekend and it seems to be in very very nice shape with chromed ways. I didn't look over the 36" too close, but here are a few shots of my ways -- the table side and you can still see the original machining marks on the unplated side.

    http://i2.photobucket.com/albums/y38...l/c0ec4168.jpg
    http://i2.photobucket.com/albums/y38...l/220c4f3d.jpg

    Here's the ad (but I got the Kurt vise):

    http://www.machinetools.com/MT/machi...21692698495118

  • #2
    hey that's not allowed here.

    feel free to go pop it into www.practicalmachinist.com classifieds. many of this crowd frequent that site anyway.

    Comment


    • #3
      Good looking Bport. Nice mill for shop with limited space, not much bigger than a mill-drill. Someone will appreciate you posting the link.

      [This message has been edited by precisionworks (edited 03-01-2005).]
      Barry Milton

      Comment


      • #4

        Your more than welcome to also post ForSale adds on my bbs system:

        http://www.bbssystem.com

        -3Ph

        Comment


        • #5
          Thanks for the link. Sure wish I lived closer to the seller!!

          Comment


          • #6
            Sorry! Should have looked more closely at the rules and regs.

            Is there a moderator who could close / delete this thread?

            Comment


            • #7
              If I had the money and means to move it, I would already be there looking at it.

              Comment


              • #8
                I'm close, wish my ceiling was higher

                Comment


                • #9
                  That price is actually high for that BP around here.. I got mine w/DRO, 42" table, 2HP Variable speed Head w/Kurt Vise, and r8 collets for around $1500 from the want Ads
                  http://www.thewantads.com

                  Technically, I bought both my Lathe and Bridgeport from the same guy for $3k, so I figure the Bridgeport is $1500, and the lathe is $1500....

                  -3Ph

                  Comment


                  • #10
                    3PH,

                    You're making me cry. Nice Bports in the St. Louis area, equipped like yours, bring $3,000+. The only ones in the $1,500 range are ancient, abused & neglected - like some of the forum members!
                    Barry Milton

                    Comment


                    • #11
                      Sorry. I guess I should have read the terms a bit closer. I could have also called it a gloat as I'm really happy with what I ended up with.

                      Comment


                      • #12
                        Man, I'm losing it. Thought I posted an apology but didn't see it. Sorry again!

                        After a bit of negotiation I think I paid a fair price given the condition. Here are the accessories I got as well.

                        http://photobucket.com/albums/y38/aterren/Mill/

                        BillH - My dad and I moved it this weekend with a come-a-long, a 4x8 sheet of ply, 2 8' pieces of 2"x2" angle iron, a floor jack, some jack stands, ratcheting straps, and a U-Haul 6'x12' trailer. It really wasn't that bad. If you have access a tow vehicle you could do it for something like $150.

                        Comment


                        • #13
                          AT,

                          You didn't "advertise" something you had for sale, you just listed a link to an item that might be of interest to others. Neil Knox would have zapped the thread had it been improper, something like:

                          ITEMS FOR SALE CHEAP: http:\\mywebsite.com

                          I think everybody (except one) appreciated your post.
                          Barry Milton

                          Comment


                          • #14
                            Thanks.

                            I think most took it as I intended -- "hey look got some cool stuff, maybe one of you can too!"

                            BUT, being new to this forum and under some time presures (see my Southbend lathe post) I didn't do much lurking before posting.

                            Ciao,

                            Adrien

                            Comment

                            Working...
                            X