Announcement

Collapse
No announcement yet.

Leveling lathe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • J Harp
    replied
    Thanks for the tip smtty58, I had just fopund this website and hadn't explored it fully, looks like a good one,lots of imfo

    Leave a comment:


  • Smtty58
    replied
    Do a forum search here, Mr. Addy posted a detailed reply not too long ago.

    Leave a comment:


  • J Harp
    started a topic Leveling lathe

    Leveling lathe

    Can someone discuss the procedure for leveling a lathe which has four bolts under the headstock and two at the right end of the bed? I want to avoid putting a bow or a sag in the bed when adjusting the bolts on the headstock end. thanks for the help .

    Jim
Working...
X