Announcement

Collapse
No announcement yet.

Shop Layout Help.....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guest's Avatar
    Guest replied
    The bins work great. I haven't turned anything yet with the bins there so I;m not sure how many chips (if any) will be tossed into the bins, but it doesn't matter to me. I keep all of my bolts, nuts, washers, dry wall screws, and rivets in those bins.. I just reach over and grab however many I need.

    -Adrian

    Leave a comment:


  • J Tiers
    replied
    <font face="Verdana, Arial" size="2">I've been trying to find space to mount poly bins because I love being able to just see inside them when I'm looking for bolts, nuts, etc.. I mounted a bunch of poly bins behind my lathe on the wall:
    </font>
    How do you like them?

    I was going to do something similar. Then I figured that they were basically swarf collectors, and that I wasn't going to want to stretch out over the lathe to grab anything.

    As for putting it BACK, that has to be easy, or else it generally won't happen.

    Leave a comment:


  • Guest's Avatar
    Guest replied

    I've been trying to find space to mount poly bins because I love being able to just see inside them when I'm looking for bolts, nuts, etc.. I mounted a bunch of poly bins behind my lathe on the wall:



    I also recently built a drawer for my Welding/Shop bench that's around 40" wide, and 20" deep and 3" tall where I keep some hand tools that give easy access to thgem while working on projects on my bench:



    I'm going to build 3 more drawers like that one. My shop bench will soon be completely clean on top when I finish moving all of the crap into the chests.




    -Adrian

    Leave a comment:


  • Steve Stube
    replied
    Geezs, the big photos were too big and the small ones too small. Hope this is okay.

    Finding more storage space to put things away is a never ending battle I have found.

    If you go to this link and look at the electric room you will see more evidence of clutter.
    http://www.chaski.com/ubb/showflat.p...=all&fpart=all

    Here is about a 12' bench with 1-1/4" Birdseye Maple top I remember building it but haven't seen it for a very long time.


    I have lots more in benches and cupboards but I'll spare you the trouble of trying to see a CLEAR bench top - I don't have any.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Your right, I can barely see anything in those 160 x 120 thumbnails.. Do you have larger versions?

    -Adrian

    Leave a comment:


  • Steve Stube
    replied
    Your idea of using the Craftsman cabinets I understand but I found that the 2 double deckers I have will hardly can be considered portable after I loaded them with tools. I put some marginally better casters on them and they still don't move without lots of pursuading. I use 5 of the Craftsman benches upstairs (2 more in the garage) but most of my benches are built on metal Lab cabinets.






    20+ feet of benches on each side of this isle facing each other plus the metal overhead cabinets and storage above that.
    As you can see, even with lots of drawers there is no garantee the bench tops will be seen.

    When I see an opening on a wall I build more storage shelves.



    But they fill up so quick!





    [This message has been edited by Steve Stube (edited 06-28-2005).]

    Leave a comment:


  • Your Old Dog
    replied
    I see that pipe that some want you to take out as a nice support for a macho swinging overhead bank of flourescent lights that can be swung out where your working. I've also seen guys make brackets and mount grinders on pipes just like that. It's an asset, not a liability

    Leave a comment:


  • Guest's Avatar
    Guest replied

    Yup, that's my new socket set that I haven't touched yet. My old set is scattered around all over the place in my garage and basement. It would probably take all day to find them. I found one of my old deep sockets on my lawn the other day. Musta rolled out of the garage and down the driveway last year

    -Adrian

    Leave a comment:


  • Evan
    replied
    It's a simple consequence of having too much stuff. I also have four roll arounds full of tools and basically three shop areas. The garage where the pic is taken, the machine shop downstairs and the buffing and grinding room isolated from the machine shop. Also not shown in that pic (it's a couple of years old) is my Strands drill press and the horizontal band saw which live in the garage.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    That's exactly what I wanted to steer away from I really wanted to have most of my items visible but it just wasn't going to happen without utter chaos.

    -Adrian

    Leave a comment:


  • andy_b
    replied
    i don't think Adrian uses those tools. look how shiny they are. no marks on the sockets from turning them with vise grips, and no weld splatter from using them as welding jigs. plus i don't see any cracks in the sockets from putting 5' cheater bars on 1/2" drive sockets to get 500ft-lbs of force on a nut.

    i do like the rolling toolbox idea. in fact i bought a second one a few months ago to put the various small machine tool accessories into that i was accumulating over the past year.

    andy b.

    Leave a comment:


  • Evan
    replied
    Hmm. You asked for a picture of my shop wall...

    This is one of them.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    <font face="Verdana, Arial" size="2">Originally posted by tattoomike68:
    the name of this topic should be " Shop space on wheels"

    how did you deal with the rolling shear?

    I hope you are not chasing it around jumping on it too.
    </font>
    I think I'm going to place the shear where the tool chest on the end next to the poll is.. That was the original plan before I got the chests idea. I'll probably move that chest to another location because the shear on wheels fits in that spot nicely. The shear is pushed up against my welding/shop table right now.

    JRouche: I'm wondering what kind of storage units I can mount to that pole. Maybe just a bunch of hooks to hang things from..

    -Adrian


    Leave a comment:


  • Guest's Avatar
    Guest replied
    Am I missing something here? 15 FEET of vacant wall?

    Leave a comment:


  • JRouche
    replied
    3 Phase: Dont forget to get a nice sized pipe cutter and trim that pipe outta there


    Your Old Dog: The doors(3) roll on some bearings I had on hand. I cut a 3" wide strip of 16ga. sheet metal to line the concrete floor that the bearings ride on. The sheet metal strips are surrounded by a wood guild for the bottom of the doors. JRouche

    Leave a comment:

Working...
X