Announcement

Collapse
No announcement yet.

Can it get any better!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • egpace
    replied
    Bernie,
    Thanks for the tip, I'll check it out. I did find a Burke No. 4 Manual on line at Metalworking.com, so the quest begins.
    Ed

    Leave a comment:


  • itsmeBernie
    replied
    In the picture of the base is a RUSNOK Milling head, similar to the old Bridgeport heads. I am guessing it is a Model 70. There is a RusnokMill YAHOO group that specializes in just these heads.

    http://groups.yahoo.com/group/RusnokMill/

    They have info on collets and identification and years of manufacture and everything.


    Bernie

    Leave a comment:


  • HTRN
    replied
    I want to know where in NJ this is...

    Considering I worked "just over the bridge" up until a month ago...


    HTRN

    ------------------
    This Old Shed

    Leave a comment:


  • Alistair Hosie
    replied
    About four years ago I bought some collets from a nice polish gentleman in Larkhall as we got chatting he says wait till you see this and took me to a second shed he had nearby,in it had a PRISTINE and I mean PRISTINE myford super seven with every conceivable extra it was on makers stand and looked the Camels cahoonahs .He went on to tell me that the local town drunk called in too see him to let you understand this guy (the drunk)lived in his deceased parents house and was living with oput electricity etc etc you know the type.He asked the polish guy if he would be interested in giving him آ£50 for the lot despite the polish guy (so the story goes) offering him more he would not hear of it and the polish guy told me he himself was so excited about the buy he started shaking and could not wait to get it in the van quick enough. He would easily have got آ£1500 to آ£2000 easily I never heard what happened.I nearly cried when I looked at it it was a beauty I have never seen a second hand one so nice with so many extras .So guys miracles do happen Alistair

    Leave a comment:


  • panchula
    replied
    There's a yahoo group for Burkes.

    http://groups.yahoo.com/group/burkemills

    The Burke vertical heads are a prized item that commands a premium price. You made a terrific find. They're great little industrial quality machines. Army versions of the manual are available on the Yahoo group. Spares and other information are available fro D.C. Morrison of Covington, KY. http://www.dcmorrison.com

    -Mike

    Leave a comment:


  • egpace
    replied
    snowman & Too_Many_Tools (Not_Enough_Storage)

    “go knock on the door “

    I met the gent who owns the “Gold Mineâ€‌ He was out in the yard carrying some odds & ends out to the curb (Nothing of value). I told him I was the one who picked up the mill and he smiled and said he was happy that someone wanted it! He said it was a good machine but he hadn’t used it in years and he couldn’t take it with him. He hated the idea of it ending up in the junk heap, but had no choice. I asked him why he didn’t try to sell it. He just shrugged it off and said the he got it from a friend as a gift years ago, and wasn’t losing anything by dumping it. I mentioned the Kennedy box, again he smiled and said he’d keep his eyes open for the keys and that I should check back with him later. He was kind of busy so I didn’t want to hold him up. You really had to drag things out of him. I don’t think he was a machinist as he didn’t “talk shopâ€‌, I’m guessing he picked it up as some kind of turn-key small manufacturing deal for single part short run production. I didn’t ask, but there was no mention of a lathe, drill press, or tool grinder, etc. (I WILL drive by again though)

    Ed

    “Just as a matter of interest, if you don't pick it up, what happens to it? Our garbage collectors don't even take a cardboard box if it's not folded small and tied up with string!â€‌

    Hans,
    The injection molding machine was picked up with a bucket loader by the town d.p.w. this morning and taken to the local dump. I’m guessing that’s where the mill would have ended up if I hadn’t rescued it.

    Ed

    P.S. new Motto: “Seek, and ye shall findâ€‌

    Leave a comment:


  • thistle
    replied
    Now i know where my luck at getting free to cheap stuff has gone,keep looking while the luck lasts!

    Leave a comment:


  • C9
    replied
    Leaving stuff on the curb doesn't always work.

    I left a good mag wheel out on the lawn by the sidewalk for a week.
    Not even the lowlife's who used my street to get into a seedier part of town would steal it.

    Gave up and made a garden hose hanger out of it....

    Leave a comment:


  • Michael Az
    replied
    I think I know what is going on with Ed. He isn't finding what he thinks he is. What is going on is people doing a cleanup of their shop. They drag a lot of stuff out side so they have room to do a good cleaning and here comes Ed and grabs their stuff! Wait till he gets cought. It happened to me once. It was yard sale day and I pulled up to this one place and got out and started looking over items when a lady came over and told me they were just cleaning out the garage and not having a sale. Embarressing!
    Michael

    Leave a comment:


  • Guest's Avatar
    Guest replied
    GO KNOCK ON THE DOOR!!!

    The stuff on the curb is only the tip of the iceberg.

    You may already be too late.

    Once you tally up the worth of this stuff, you will understand why I say...

    GO KNOCK ON THE DOOR!!!

    ;< )

    TMT

    Leave a comment:


  • matador
    replied
    Almost worth coming half way around the world to come and trawl the curb in your neighbourhood .I guess "one man's junk is another man's treasure".I wouldn't mind finding a piece of tooling,never mind a complete machine at the side of the road .
    Good scrounging skills,Ed!
    Just as a matter of interest,if you don't pick it up,what happens to it?Our garbage collectors don't even take a cardboard box if it's not folded small and tied up with string!

    ------------------
    Hans

    Leave a comment:


  • egpace
    replied
    "That is the Burke vertical head attachment for the mill...a highly prized accessory for the mill. Takes a slightly unusual collet....maybe a small BP collet. The head works fine within the capacity of the mill"

    Fred,
    Thanks for the info. Any resourses (User group/forums, manuals, etc.)for the Burke out there?
    Ed

    Leave a comment:


  • egpace
    replied
    <font face="Verdana, Arial" size="2">Originally posted by aboard_epsilon:
    nice find ED
    hows about this :-)

    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7538009084&rd=1&sspa gename=STRK%3AMEWN%3AIT&rd=1

    all the best....mark
    </font>
    Mark,
    Wow, just goes to show, if you keep your eyes open there's some great deals out there.
    Congrats!

    Leave a comment:


  • egpace
    replied


    "NJ is clearly THE place to be..... if you happen to have a crane in your truck".

    J Tiers,
    You got that right! Check out this one. $40.00 and no takers. (Mountain Lakes, New Jersey)

    http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT


    Leave a comment:


  • Fred White
    replied
    &gt;&gt;I'm guessing the 2nd head is manufactured by Burke also. Anyone recognize it?

    That is the Burke vertical head attachment for the mill...a highly prized accessory for the mill. Takes a slightly unusual collet....maybe a small BP collet. The head works fine within the capacity of the mill.

    Leave a comment:

Working...
X