Announcement

Collapse
No announcement yet.

Novel way of parting off

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Novel way of parting off

    Saw this for sale on bay:

    http://cgi.ebay.co.uk/Smart-Brown-Th...QQcmdZViewItem

    I guess it's for use with collets. Seems like a good idea to mount the slide directly to the headstock, rather than the bed - anyone seen one of these before?

    Ian
    All of the gear, no idea...

  • #2
    Yup. Had them on our little process lathes at the old place.

    Once you load up the lathe tail stock turrent with tooling and add 2 turning/forming bits on the crosslide, you have to use this for cutoff. It is normally used in a production type shop, but it would work great for the HSM.

    rock-
    Civil engineers build targets, Mechanical engineers build weapons.

    Comment


    • #3
      Siliar to the Hardinge style. Heck it may be a rip-off of Hardinge's or the other way around for all I know. Or from somebody els'es design. But they ony work with collets. Also they have to set up just right or they don't work very well as they can have a tendency for the tool to grab. But when set-up properly the worker slicker than snot.
      Forty plus years and I still have ten toes, ten fingers and both eyes. I must be doing something right.

      Comment

      Working...
      X