Announcement

Collapse
No announcement yet.

Tig cooler revision...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    That's some #6 wire I had around. I really need to rig up a proper cord.
    Techno-Anarchist

    Comment


    • #17
      I hate recessed panels.. My main 200A house panel is recessed into the dry wall. I added a non-recessed 100A panel so I could easily wire up my tools and equipment with stress releved shielded cable. In my shop panel I've got the TIG wired to a 100A breaker (using 2-2-2), the MIG/Plasma to a 50A breaker (Receptical) #6, the Air Compressor to a 50A breaker #6, the 3-Phase Rotery Generator to a 30A breaker #8, etc. If the pannel was recessed I would have made a mess for sure.

      -Adrian

      Comment

      Working...
      X