Announcement

Collapse
No announcement yet.

Footprint of DoAll Vertical Bandsaw

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Footprint of DoAll Vertical Bandsaw

    I have a DoAll Vertical Bandsaw, but it is not nearby at the moment. I am doing a layout and want to know the footprint. It is the one with the built in grinder and welder. Anyone know the size of this beast?

  • #2
    Hi Bruce
    I think you will need to list the size and the model of the saw. Doall made lots of different saws from old 14" saws up to very large Pan arm saws that have a table that 36 x 60 in.I think that the 16" 20" and 26" are the most common. I have a 1612-0 saw
    Andy

    Comment


    • #3
      It is a dual 16" wheel saw - if not that, very close to 16".

      Comment


      • #4
        Bruce
        I'm not by my saw right now but it's (1612-0)
        about 26" by 26" for the footprint and the table sicks out about 8" on the front and right. Hope this helps
        Andy

        Comment

        Working...
        X