.png)
Tweet
David:
I'd originally purchased the QX3+ to use as a cheap circuit board inspection device, but found that it had much wider range of application in a shop setting in terms of machine tool alignment, work setup, etc.
Focal length is about 1 to 1.25 inches (23 - 29mm).
I still haven't made a proper stand for it, as shoptime has been really limited for the past couple or three years - work just gets to be what life is all about.
-bob
I'd originally purchased the QX3+ to use as a cheap circuit board inspection device, but found that it had much wider range of application in a shop setting in terms of machine tool alignment, work setup, etc.
Focal length is about 1 to 1.25 inches (23 - 29mm).
I still haven't made a proper stand for it, as shoptime has been really limited for the past couple or three years - work just gets to be what life is all about.
-bob
Comment