Announcement

Collapse
No announcement yet.

Looking for a Cam Grinder Plan

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking for a Cam Grinder Plan

    I'd like to build a grinder for cams and crankshafts for my model IC engines. Anyone with a good plan to share?
    Smitty.... Ride Hard, Die Fast

  • #2
    November/ December 2004 Home Shop Machinist
    Ad maiorem dei gloriam - Ad vitam paramus

    Comment


    • #3
      I'm pretty sure there were plans for a cam grinder in some back issues of Strictly I.C. magazine...although at this point I don't know where you would find the back issues.
      ----------
      Try to make a living, not a killing. -- Utah Phillips
      Don't believe everything you know. -- Bumper sticker
      Everybody is ignorant, only on different subjects. -- Will Rogers
      There are lots of people who mistake their imagination for their memory. - Josh Billings
      Law of Logical Argument - Anything is possible if you don't know what you are talking about.
      Don't own anything you have to feed or paint. - Hood River Blackie

      Comment


      • #4
        SIC back issues are still available from the Washburns. I think there were at least 2 different cam grinder plans in there. HSM has had one or two as well.
        Here is the web link for SIC:

        http://www.strictlyic.com/

        ------------------
        Tom

        Be careful what you wish for, you might just get it!

        [This message has been edited by Ausserdog (edited 02-28-2006).]

        [This message has been edited by Ausserdog (edited 02-28-2006).]
        Tom

        Be careful what you wish for, you might just get it!

        Comment


        • #5
          Thanks fellas, Those Strictly I.C. mags are a goldmine of info. I'm sending in my order.

          ------------------
          Smitty.... Ride Hard, Die Fast
          Smitty.... Ride Hard, Die Fast

          Comment

          Working...
          X