Announcement

Collapse
No announcement yet.

Drill Press

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Drill Press

    Just got a Handee drill press,made by
    Chicago Wheel & Mfg Co. It's not all their!
    Looks to have some type of collet chucking
    system that I didn't get. Anybody ever see
    one of these?
    Bob G

    ------------------
    Bob Indiana
    Bob Indiana

  • #2
    I have a very old drill press circa 1940. This drill press had a collet system that worked in the morse taper socket. The main body is a #3 morse which is split in two pieces and accepts a collet which is sized to take collets for drills with no tapered shank. Does this sound similar?

    Comment


    • #3
      Bob Indiana ,
      dont how close you are to me here in ft wayne but if you need help retooling that or what not feel free to email me

      [email protected]

      maybey i can help i have made a few morse taper split collars for machines like yours

      Comment


      • #4
        The spindle hole dia. is 5/16in.with a flair at the bottom. Spindle lenth is about
        4in. Does that help.
        Bob

        ------------------
        Bob Indiana
        Bob Indiana

        Comment

        Working...
        X