3 Phase motor missing wire tags help me

[outlawspeeder]

Need a hand

Tag wires
T4-T7
T5-T8
T6-T9
T3 to power

This where I need a hand

?? to power
?? to power


If I disconnect all wires I should have a resistant between what should be T1 to T4 and T2 to T5.
Everything else should be open.

[PStechPaul]

T1, T2, and T3 are power for series (480) and parallel (240)

[outlawspeeder]

Sorry I was not clear. I need to rewire to 240.

I need to join T7 to T1 and T2 to T8.. The problem T1 and T2 tags are missing. How do I figure out which wire is T1 and the other is T2?

If I disconnect all wires I should have a resistant between what should be T1 to T4 and T2 to T5?

[PStechPaul]

Yes. that should do it.

[Ohio Mike]

Sorry I was not clear. I need to rewire to 240.

I need to join T7 to T1 and T2 to T8.. The problem T1 and T2 tags are missing. How do I figure out which wire is T1 and the other is T2?

If I disconnect all wires I should have a resistant between what should be T1 to T4 and T2 to T5?

You got it. Since you have some of them ID'ed you're golden. If they were all missing you'd have to start from scratch.