My Wilton 20" drill press came to me with, what I've learned, is a, "mill cap". It screws on to the end of the quill and the manual/parts list calls the part out as being "optional". I've had the DP for years and never knew what this was. I can't run it with my mt3 arbor that's on my drill chuck because it protrudes too far from the end of the quill and the Mt taper won't seat so the chuck just falls out. Can anyone tell me what a "mill cap" is?
BTW the instruction /parts manual has several pages dedicated to milling with this DP and this surprised me. I suppose some light milling might be possible using the Mt taper but there is no draw bar etc.
Thanks