Announcement

Collapse
No announcement yet.

Well, the CNC mill works!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Well, the CNC mill works!

    I need to practice using ball mills in Fusion360, so disregard the oval. This was just a quick test. The square clocks in at .500", the circle is 1.000" in both X and Y, depending how I hold the calipers. I'm ecstatic, just wish the mill was 3x larger now
    The heavy duty base, R8 spindle, and the 3 phase motor make this Taig an entirely different mill. The TTS tooling with height offsets in the tool library is the single biggest thing I ever wanted.
    Well, my tool touch off plate isn't working, that's easy to fix.
    Click image for larger version

Name:	20200920_235307.jpg
Views:	131
Size:	2.80 MB
ID:	1900631

  • #2
    GWizard will calculate the cusp or scallop height for you or you can model it in Fusion 360 in order to get a better finish with a ball endmill.

    Comment


    • #3
      Well done ! Lots of custom RC airplane parts on the way !

      Comment


      • #4
        Congratulations!

        Comment

        Working...
        X