Announcement

Collapse
No announcement yet.

Craig list find

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Craig list find

    Found these Sherline items on Craigslist last week. Drove 6 hours one way to collect. The lathe has had some use, but shows no wear. The mill looks like it was never used.













    A lot of the accessories have never been used.
    $1500 for all
    Gary Davison
    Tarkio, Mo.

  • #2
    All your micro machining kit in one go, you must be very pleased.

    Comment


    • #3
      Drove 6 hours for that ? ? ? ?
      You must like to drive.

      -D
      DZER

      Comment


      • #4
        Well as a Sherline owner, I will give you props! Nice find! Really well accessorized. If you have never used Sherline equipment and you stay within the design parameters, you will have fun and make neat stuff!
        Sole proprietor of Acme Buggy Whips Ltd.
        Specialty products for beating dead horses.

        Comment


        • #5
          Made some cool stuff on my Sears/Sherline lathe. Some parts that would be very difficult/impossible on my 13x40 lathe. It is a lot of fun.
          Looks like you got everything, even the thread cutting gears for the lathe. Well done.

          Mike

          Comment


          • #6
            Very nice!

            Comment


            • #7
              Good buy, locally the last mill that sold on CL with it's mostly complete tooling package went for $40 less than new and it's didn't have the rotary table.
              I just need one more tool,just one!

              Comment


              • #8
                I say nice find. Have fun!
                Paul A.
                SE Texas

                Make it fit.
                You can't win and there IS a penalty for trying!

                Comment


                • #9
                  Sherline and Taig lathes don't get enough credit. Sometimes you need a lathe that will spin 6000 rpm for the tiny stuff. Not going to do that on your generic 12x36 or 10ee.

                  Comment

                  Working...
                  X