Announcement

Collapse
No announcement yet.

Something I’ve been working on

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Something I’ve been working on

    Just got this fully registered
    You may only view thumbnails in this gallery. This gallery has 2 photos.

  • #2
    Very cool, what’s the details on it? Your own design or plans of some sort? I would like to do a double shot derringer at some point.

    Comment


    • #3
      Picture show the high quality of your work but we still need info.
      Don't leave us hanging.

      Hal
      Last edited by Hal; 11-18-2020, 07:21 PM.

      Comment


      • #4
        Nice work Sid. A friend of mine made A similar one from on line plans a couple years ago. It had a design flaw on the seer which opened the possibility of discharge when dropped. Similar to the SKS rifle. You need a positive angle on the seer so the hammer moves slightly backward as the seer is being pulled away. Hopefully your design already incorporates this.

        Comment


        • #5
          Very nice.
          What caliber ?
          Flare gun ?
          I have no idea.
          Beaver County Alberta Canada

          Comment


          • #6
            Originally posted by redlee View Post
            Very nice.
            What caliber ?
            Flare gun ?
            I have no idea.
            doubt it’s a flare gun and firing pins look like center fire so no 22lr.

            Its hard to tell scale on it but barrels don’t look big enough for .410 shot shells. Id wager a guess on .380 or possibly 9mm.

            Comment


            • #7
              Cigar lighter?

              Comment


              • #8
                Its 25 cal.
                It's loosely based on the Double Tap Defense pistol.
                But my own design and experiments.
                It's not the greatest of ergonomic designs, I know, but this was primarily an exercise to see if I could do it.

                I did not want to show it until it was properly registered. No one (local gun shops) new how to do that here in NY.

                Comment


                • #9
                  I think it's 50 bmg

                  Comment


                  • #10
                    50 bmg???

                    Comment


                    • #11
                      Any pics of the workings inside? Did you do the rifling yourself or use barrel blanks?

                      Comment


                      • #12
                        What .25 .

                        Hal

                        Comment


                        • #13
                          Originally posted by oxford View Post
                          Any pics of the workings inside? Did you do the rifling yourself or use barrel blanks?
                          I'll have to take it apart to get pictures.
                          I did use barrel blanks.

                          Sid

                          Comment


                          • #14
                            Originally posted by sid pileski View Post

                            I did use barrel blanks.

                            Sid
                            I made a single shot GB22 and used a barrel blank as well. I would like to play around with some rifling buttons at some point.

                            Comment


                            • #15
                              Originally posted by Hal View Post
                              What .25 .

                              Hal
                              What are you asking?
                              .25 ACP
                              Last edited by sid pileski; 11-18-2020, 10:10 PM.

                              Comment

                              Working...
                              X