Announcement

Collapse
No announcement yet.

rattleback

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Turd would nations !
    Man you got me !
    DZER

    Comment


    • #17
      I had a manager convinced once
      that if you spun the end mill backwards
      it would put metal back on,
      and we could fix the undersize parts!

      Be believed it until the rest in the group
      broke out laughing !

      -D
      DZER

      Comment


      • #18
        Don’t laugh I stuck a horizontal side and face cutter on an arbour (horiz) and proceeded to cut a 1/4” groove in a block, the worse thing is I successfully cut a awful looking groove with a backward cutter, did not see that coming, last time I did a stupid like that I fockered the ****e out of the cutter, workpiece, I say to myself, won’t do that again, agin works out to be about 10ish years over here
        mark

        Comment


        • #19
          Originally posted by dian View Post
          my rattleback turns clockwise. i see them turn anti-clockwise on youtube. would it turn the other way in australia? what has to be done to get it to turn the other way? make a mirror image about an axis, about the center?
          Is that like a rattlesnake ??

          JL......

          Comment


          • #20
            More like a shaky running back...
            http://pauleschoen.com/pix/PM08_P76_P54.png
            Paul , P S Technology, Inc. and MrTibbs
            USA Maryland 21030

            Comment

            Working...
            X