If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
A job to use? It’s a 15 Ton compound press.
By sliding the pin from the left to the right or vise
versa, you can go from 7 Tons to 15 Tons, so it’s
not hard to use.
X2 on what Hammer said, my 25ton Dake is similar and easy to use.My Greenerd 3E with 24” Shipwheel is better suited for smaller jobs under 3 Ton, every tool has it’s place😊
A job to use? It’s a 15 Ton compound press.
By sliding the pin from the left to the right or vise
versa, you can go from 7 Tons to 15 Tons, so it’s
not hard to use.
Tweet
.png)
Comment