Announcement

Collapse
No announcement yet.

Enco machinery

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • bob308
    replied
    yes it is an enco. i got it with free shipping. and i got it with the dro which is made in the usa and power feed on the x axis. the new ones have box ways which i don't know if b-p has yet. also got it new for less then a used b-p was selling for around here.

    Leave a comment:


  • QSIMDO
    replied
    Originally posted by kap pullen
    Qsmdo,
    I purchased an Enco 9 x 42 change belt in 1992.
    The machine has fed the family and made many, many
    hobby projects.
    I've worn out two drawbars in that time.
    I suspect many of the common name brands are ok.
    The two Euromills I've been involved with had spindle bearing
    problems.
    Kap
    Certainly can't argue with success!
    And you're lucky to have that talent.
    Thankfully I'm in a position to look at a machine on this level to just screw around with and I've no doubt I'll never come near the capability of the machine.
    I just want to have fun!
    "HSM", that's me.

    Leave a comment:


  • QSIMDO
    replied
    Originally posted by bob308
    i have a 9x42 vari speed and like it it is as good or better then a bridgeport.
    Which is that an Enco?

    Leave a comment:


  • QSIMDO
    replied
    Originally posted by bob_s
    Have the Jet 836 it's a nice machine, but ... the grizzly 3616 looks to be more machine for less money - even paying the shipping it's less than the Enco on sale.
    That IS a nice machine, but the table travels put me off a bit.
    Another one of theirs that seems to be more of a direct comparison to the Jet is the model 6760.
    Speeds, size, travels, etc.

    Am I overlooking something really important?

    Leave a comment:


  • kap pullen
    replied
    Qsmdo,
    I purchased an Enco 9 x 42 change belt in 1992.
    The machine has fed the family and made many, many
    hobby projects.
    I've worn out two drawbars in that time.
    I suspect many of the common name brands are ok.
    The two Euromills I've been involved with had spindle bearing
    problems.
    Kap

    Leave a comment:


  • bob308
    replied
    i have a 9x42 vari speed and like it it is as good or better then a bridgeport.

    Leave a comment:


  • bob_s
    replied
    Have the Jet 836 it's a nice machine, but ... the grizzly 3616 looks to be more machine for less money - even paying the shipping it's less than the Enco on sale.

    Leave a comment:


  • QSIMDO
    started a topic Enco machinery

    Enco machinery

    Is anyone familiar with Enco's milling machines?

    They're running a sale on their 8x36 and I'm wondering how they compare to Jet.
    Last edited by QSIMDO; 04-18-2006, 10:25 PM.
Working...
X