Announcement

Collapse
No announcement yet.

Jacobs headstock chuck

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jacobs headstock chuck

    Do any of you know where to find a Jacobs (or equivalent)hollow headstock chuck? I have an Atlas/Craftsman 12" lathe with a 1 1/2"-8 tpi spindle. Thanks.

  • #2
    check ebay. these appear somewhat frequently
    59B is the p/n
    gvasale

    Comment


    • #3
      Jacobs seems to have stopped making these, but as gvasale points out, they are fairly common used.

      Also try "the usual suspects" list of used machinery dealers who advertise in HSM: Dave Sobel, Plaza Machinery, Meridian Machinery....
      ----------
      Try to make a living, not a killing. -- Utah Phillips
      Don't believe everything you know. -- Bumper sticker
      Everybody is ignorant, only on different subjects. -- Will Rogers
      There are lots of people who mistake their imagination for their memory. - Josh Billings
      Law of Logical Argument - Anything is possible if you don't know what you are talking about.
      Don't own anything you have to feed or paint. - Hood River Blackie

      Comment


      • #4
        I had one on my Atlas 6 x 18 and they are as handy as a pocket on your shirt--almost as good as having a set of collets up to 1/2" capacity.

        Comment


        • #5
          I have both the 58B and 59B. There is a 59B now on eBay @
          http://cgi.ebay.com/ws/eBayISAPI.dll...category=25292
          The 59B chucks from 3/16" to 3/4".
          The 58B chucks from 1/8" to 5/8". Bear in mind that for long objects the ID of your spindle is your limiting factor.
          Jim Larsen
          Hayward, Calif.

          Comment

          Working...
          X