Announcement

Collapse
No announcement yet.

fly tying vise

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wfillmann
    replied
    oops! here is my email address: [email protected]

    Leave a comment:


  • wfillmann
    replied
    <font face="Verdana, Arial" size="2">Originally posted by mttconant60194:
    I could probably dig up some plans. What type of steel are you planning on using may I suggest 4130 or 4140? email address??</font>
    Thanks! I would appreciate any suggestions. Like I said, I'm pretty much a novice when it comes to machining, but I have made some things. I'm interested in any rotary design, where the hook can be truely turned on its axis(similar to a Regal or Renzetti). I would consider other designs as well.

    Leave a comment:


  • mttconant60194
    replied
    I could probably dig up some plans. What type of steel are you planning on using may I suggest 4130 or 4140? email address??

    Leave a comment:


  • snorman
    replied
    I don't know of any Walt. Sounds like a dandy project however. I once considered it myself but it seemed like too much work when you can buy them cheap. I've noticed they're not so cheap nowadays! Downright ridiculous in fact.
    BTW you'll want hardened jaws on that vise.

    Steve

    [This message has been edited by snorman (edited 10-18-2001).]

    Leave a comment:


  • wfillmann
    started a topic fly tying vise

    fly tying vise

    As an experienced fly fisher and very amateur machinist, I am interesting in obtaining plans for different types of fly tying vises. Does anybody know if there is something like this out there?

    -walt
Working...
X