Does this mean anything to anyone?

[QSIMDO]

7° 7' 36".
3.2505

I have a white board next to my desk and that is written off to the side.
Trust me, I did NOT do the math so it had to be something I copied.
I don't have gage blocks so it couldn't be something I was going to machine.
Ring a bell with anyone?
It just looks so important I don't want to summarily erase it.

[Doozer]

Kilroy was here.
I saw this on a fence in Germany.
Wonder what it means.?

-D

[eKretz]

I was thinking maybe taper per foot and consequent degrees, but it doesn't work out. Close but not quite. 3.2505" TPF is a 7°42'47" half-angle.

[RB211]

That's Latitude coordinate N or S, but I use them in a different format, and with a Longitude. It's incomplete, probably a temporary note for someone.

[gellfex]

That's Latitude coordinate N or S, but I use it slightly differently, and with a Longitude. It's incomplete, probably a temporary note for someone.

What I was thinking. Time to get a shovel and go treasure hunting!

[ImFred]

Code for a mistress phone number.

[RB211]

What I was thinking. Time to get a shovel and go treasure hunting!

7⁰ North could place you on the Panamanian southern border.

[mklotz]

7⁰ North could place you on the Panamanian southern boarder.

And he doesn't like to have things placed upon him...

border - the part or edge of a surface or area that forms its outer boundary
boarder - the guy who rents your spare room

[RB211]

And he doesn't like to have things placed upon him...

border - the part or edge of a surface or area that forms its outer boundary
boarder - the guy who rents your spare room

Oops, I blame spell check :/

[QSIMDO]

Code for a mistress phone number.

I searched 7° 7' 36" in Google and it brought up some biblical stuff about a sinful woman.

[Jammer Six]

Cosine is .992.

Almost one. (One foot, one inch, whatever. Or one thou.)

Compound rest set to seven degrees, (or thereabouts) and it will move in fractions of a thou relative to the work.

It's how I sneak up on final OD.

[QSIMDO]

Cosine is .992.

Almost one. (One foot, one inch, whatever. Or one thou.)

Compound rest set to seven degrees, (or thereabouts) and it will move in fractions of a thou relative to the work.

It's how I sneak up on final OD.

THAT'S IT!!!
Thank you!
That was from one of those pesky YouTube creators.

[djc]

D1-5 spindle nose dimensions. See: https://www.toolmex.com/blog/325/spi...and-size-guide

[Lew Hartswick]

Kilroy was here.
I saw this on a fence in Germany.
Wonder what it means.?

-D

If you're so young you don't know then I can't begin to tell you. :-) During WWII that and the corresponding sketch was seen everywhere. :-)
...lew...

[I make chips]

What I was thinking. Time to get a shovel and go treasure hunting!

Don't show it to Oak Island fanatics.