list of Brian Rupnow engines

[aostling]

This list is now complete for 2015 and later.

Flat head hit and miss engine (02-11-2023)

https://bbs.homeshopmachinist.net/fo...nd-miss-engine

Vtwin --- maybe V4 (06-15-2022)

https://bbs.homeshopmachinist.net/fo...-twin-maybe-v4

Brian builds a Corliss (02-19-2022,)

https://bbs.homeshopmachinist.net/fo...ilds-a-corliss

Horizonatal Air Cooled Engine (10-31-2021)

https://bbs.homeshopmachinist.net/fo...-cooled-engine

A new look at Opposed Twin I.C. Engine (09-12-2021)

https://bbs.homeshopmachinist.net/fo...win-i-c-engine

T-head engine by Brian (07-06-2021)

https://bbs.homeshopmachinist.net/fo...ngine-by-brian

1" Bore x 1" Stroke Vertical I.C. Engine (01-26-2021)

https://bbs.homeshopmachinist.net/fo...cal-i-c-engine

Geared horizontal twin engine (11-26-2020,)

https://bbs.homeshopmachinist.net/fo...al-twin-engine

Building the Trevithick Engine (08-27-2020)

https://bbs.homeshopmachinist.net/fo...vithick-engine

Stephenson's Rocket--Working Model (05-06-2020)

https://bbs.homeshopmachinist.net/fo...-working-model

Thumper---A new 1 3/8" bore i.c. engine (02-27-2020)

https://bbs.homeshopmachinist.net/fo...ore-i-c-engine

Throttle governed engine (12-18-2019)

https://bbs.homeshopmachinist.net/fo...overned-engine

Old School Sawmill Edger (10-13-2019)

https://bbs.homeshopmachinist.net/fo...-sawmill-edger

Vertical hit and miss engine (6-15-2019)

https://bbs.homeshopmachinist.net/fo...nd-miss-engine

Sideshaft i.c. Horizontal Engine (03-19-2019)

https://bbs.homeshopmachinist.net/fo...izontal-engine

Building a model Drag-Saw (08-28-2018)

https://bbs.homeshopmachinist.net/fo...model-drag-saw

Double acting Double cylinder Oscillator (05-23-2018)

https://bbs.homeshopmachinist.net/fo...der-oscillator

Senft "Poppin" ENGINE (03-11-2018)

https://bbs.homeshopmachinist.net/fo...-poppin-engine

Rockerblock I.C.--Something a little different- (04-06-2017)

https://bbs.homeshopmachinist.net/fo...ttle-different

Rupnow Overhead Cam-Air Cooled (01-25-2017)

https://bbs.homeshopmachinist.net/fo...cam-air-cooled

Walking Beam Conveyor (10-14-2016)

https://bbs.homeshopmachinist.net/fo...-beam-conveyor

Vertical Cylinder I.C. Rupnow engine (07-01-2016)

https://bbs.homeshopmachinist.net/fo...-rupnow-engine

Old School Barstock 2 Stroke (02-14-2016)

https://bbs.homeshopmachinist.net/fo...stock-2-stroke

Opposed Twin I.C. (09-30-2015)

https://bbs.homeshopmachinist.net/fo...posed-twin-i-c

Gearless Mechanism--4 stroke i.c. engine (09-02-2015)

https://bbs.homeshopmachinist.net/fo...oke-i-c-engine

Oscillating I.C. Engine (05-18-2015)

https://bbs.homeshopmachinist.net/fo...ing-i-c-engine

Model Woodsplitter (01-29-2015)

https://bbs.homeshopmachinist.net/fo...l-woodsplitter

[JRouche]

Yes Sir. I am lucky to have him here. Genius. JR

[Bmyers]

Brian filled a void that Phillip Duclos created when he passed.

[aostling]

The only title I take exception to is the "Corliss." Brian' version was a good start, but it lacked the governor-controlled variable-valve timing which defines a true Corliss. He has a ball governor from another engine -- it would be nice to see it adapted to this engine.

[brian Rupnow]

Thank You Aostling---I hadn't seen this post until today.----Brian Rupnow

[aostling]

Thank You Aostling---I hadn't seen this post until today.----Brian Rupnow

Welcome back, Brian. I hope to see a new engine to add to the list.

[RB140]

I only been on this forum for a short time and what I have seen of Brian's work it is outstanding I can only imagine that the other engines are just as fantastic nice work Brian hope to see more in the near future

[Ringo]

Brian, I like watching your posts and your builds.Glad to see you back here.

[jdunmyer]

Besides engines, how about a link to Brian's Muley sawmill. That was an easy build for me and it gets lots of attention at model engineering shows.