Announcement

Collapse
No announcement yet.

Another Antique Lathe ID Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Another Antique Lathe ID Help

    I uncovered another antique bench lathe.
    Hoping someone can ID it.



    It has a 4" chuck, 8" Swing about 16" between centers. Overall length is 35"
    It has longitude power feed in both directions. Someone built a plate steel frame to support the drive and a motor. They also got a little crazy with the grey paint....
    Any ideas on who may have made this?

    Rick
    Home Model Engine Machinist
Working...
X