Announcement

Collapse
No announcement yet.

Norton Grinder Hydro Hookup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Evan
    replied
    Mike, price rotary phase converters locally.

    Leave a comment:


  • J. R. Williams
    replied
    Grinder

    My vote is to go for a VFD to power the unit. I went that route a few years ago when I acquired a small grinder. I find the ability to change the RPM helps as my unit likes a few cycles under 60. The VFD was installed in a larger plastic electrical housing with a clear front window and external push buttons and a control pot installed in the front panel. This keeps the VFD clean.

    JRW

    Leave a comment:


  • madman
    started a topic Norton Grinder Hydro Hookup

    Norton Grinder Hydro Hookup

    Finally dissasembled the Norton Grinder Buddy gave me. Cleaned it up and now the table moves without the horrible grinding scraping sounds. I need to get it going asap as i have work for it. Whats the quickest way of wiring this 3 phase unit (1 horse i think) into a single phase system. Also the cheapest. Its gotta be something i can just buy and have a electrician hook up as i dont want to burn down the house. My wiring days are over. Thanx mike
Working...
X