Announcement

Collapse
No announcement yet.

Grizzly Collets

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Grizzly Collets

    Included with the Grizzly G0516 combo, is a set of collets and a chuck. The chuck has a MT3 taper, which will work in both the headstock of the lathe and the mill. I'm now trying to find out if I can get additional collets for this chuch. It looks like some type of an ER style, but I cannot seem to match up the dimensions with any of the ER references on the web.

    Are any of you familiar with these collets/chucks? Is this a standard or a one-off Grizzly/Chinese thing?

    Here's what the set looks like:


    thanks,
    -Eric

  • #2
    You might be able to match it up here:
    http://hardingeus.com/usr/pdf/collet/2348E.pdf
    But based on a quick scan, it's not listed.
    Last edited by SGW; 12-29-2006, 01:08 PM.
    ----------
    Try to make a living, not a killing. -- Utah Phillips
    Don't believe everything you know. -- Bumper sticker
    Everybody is ignorant, only on different subjects. -- Will Rogers
    There are lots of people who mistake their imagination for their memory. - Josh Billings
    Law of Logical Argument - Anything is possible if you don't know what you are talking about.
    Don't own anything you have to feed or paint. - Hood River Blackie

    Comment


    • #3
      These collets are DIN 6388 specs form B.

      http://www.collets.de/en/p_a02b13.htm

      .
      .

      Sir John , Earl of Bligeport & Sudspumpwater. MBE [ Motor Bike Engineer ] Nottingham England.



      Comment

      Working...
      X