Announcement

Collapse
No announcement yet.

OT:Misplaced destop image.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • OT:Misplaced destop image.

    While the computer gurus are here I would like to know of there is a simple remedy for the misplaced(way off to the right and down) on the protege 7010 laptop screen of a computer I assembled from 7010 parts.On an external monitor the image is correct.Changing the display settings doesn't help and there are no screen settings that move the image like there were on the old TVs.

  • #2
    It's a Portege 7010CT I presume (not Protege). I am guessing you are using Win98 SE. If so try the video driver available here:

    http://209.167.114.38/support/downlo...family=portege
    Free software for calculating bolt circles and similar: Click Here

    Comment


    • #3
      Video driver

      Thanks for the help Evan-I had tried this before but now that I think about it(I used the computer for quite a while with the external monitor) I did use parts from a 7010 CT and 7020 CT so maybe the driver I tried is the wrong one.Will try again after we get a snow damaged building replaced.Want the laptop because of space problems for a 2nd computer.

      Comment

      Working...
      X