Announcement

Collapse
No announcement yet.

Aloris tool holder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Aloris tool holder

    Can someone tell me the thread of the holder height adjustment studs
    on an aloris CXA tool holder.

    Thanks in advance

  • #2
    3/8" X 24 tpi. The stud is 1.970" long and has a .093"w X .075"d key way running down the entire length. The keyway keeps the keyed washer from turning when locking the height adjusting knob.
    Mark Hockett

    Comment

    Working...
    X