Announcement

Collapse
No announcement yet.

Leadscrew replacement for Clausing 8520 mill

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Leadscrew replacement for Clausing 8520 mill

    I've been restoring a 1961 Clausing mill. I posted some stuff in Clausing Yahoo Group, but thought this might be of use to someone.

    http://home.socal.rr.com/davenlori/l.../Leadscrew.htm

    Dave

  • #2
    Dave, a nice job on the pictures and the write up! Did you consider sending it in for publication.
    It's good to see others using their equipment to repair other machines. I think that in over 50 years, excluding ball bearings, I have only ordered one part from the manufcturer. My latest was a new saddle for a 10" Rockwell lathe.
    Keep up the good work. John

    Comment


    • #3
      Very nice. Keep it up!

      Comment


      • #4
        Very nice work on the job and the photos. I replaced the screw and nut on my b'port but it wasn't half as difficult as your job.
        Again very nice work worthy of publication.

        ------------------
        Paul G.
        Paul G.

        Comment


        • #5
          Whot John sed; write it up as an article and send it in. Get paid!


          ----------
          Try to make a living, not a killing. -- Utah Phillips
          Don't believe everything you know. -- Bumper sticker
          Everybody is ignorant, only on different subjects. -- Will Rogers
          There are lots of people who mistake their imagination for their memory. - Josh Billings
          Law of Logical Argument - Anything is possible if you don't know what you are talking about.
          Don't own anything you have to feed or paint. - Hood River Blackie

          Comment

          Working...
          X