Announcement

Collapse
No announcement yet.

Fray Horizontal Attachment Pics?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fray Horizontal Attachment Pics?

    I know there are a couple of you with Fray Type 4s out there. Could someone post pics of the horizontal setup? I looked at one this morning, and there was a pile of parts in a cart next to the machine. Hopefully this thing will be "following me home" and I just want to make sure I get everything.


    Thanks

    Andy

  • #2
    Fray Mill

    Andy, I have a Fray B Type head mounted on a"made in Australia" Bridgeport Base. This is a Vertical only unit. I have been able to date it to around 1939.

    Tiptop, a member on this board has a Model 7 which I believe is Vertical only but not sure.

    There is a some info on a Horizontal Fray here:

    http://www.lathes.co.uk/fray/

    All of the documents from the Fray company are held by the Smithsonian Museum in Washington.
    I was forwarded copies of sales brochures by a very helpful gentleman at the Museum. If you like I will forward you his email details to you privately.

    Please post photos when you get the machine.

    Mine is still in rebuild but hope to have it running in a couple of months.

    Rgds
    Michael

    Australia

    Comment


    • #3
      Originally posted by miker
      Andy, I have a Fray B Type head mounted on a"made in Australia" Bridgeport Base. This is a Vertical only unit. I have been able to date it to around 1939.

      Tiptop, a member on this board has a Model 7 which I believe is Vertical only but not sure.

      There is a some info on a Horizontal Fray here:

      http://www.lathes.co.uk/fray/

      All of the documents from the Fray company are held by the Smithsonian Museum in Washington.
      I was forwarded copies of sales brochures by a very helpful gentleman at the Museum. If you like I will forward you his email details to you privately.

      Please post photos when you get the machine.

      Mine is still in rebuild but hope to have it running in a couple of months.

      Rgds

      That would be

      [TonyTheTiger]

      GRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR REAT

      [/TonyTheTiger]



      Please send them to [email protected]



      Andy

      Comment


      • #4
        Andy, Yes Michael is right. I do have a Fray miller. I am very pleased with it. It is a model 10-R, Type 4-C. It dates from the late 50s or early 60s, I think but am not positive. I am not sure when they went out of business but mine is towards the end of their production I believe because it has all the bells and whistles they offered for that model. My type 4 head has a NMTB 30 taper spindle and I like that more than the #7 B&S or the #3 Morse taper. Don't get me wrong, they all work, but the 30 taper has more bearing contact area and releases easily. Let me know if I can be of any help to get you going on this machine, I would be more than happy. Feel free to PM me if you have any questions. Also if you run into any spare parts or machines, I am always looking for Fray stuff. Take care, good luck, and keep us posted. Jay
        "Just build it and be done"

        Comment


        • #5
          fray info

          Andy, I just forwarded you two emails. One has attachments and may be a little slow to open initially.
          Please let me know if you receive them OK.

          Rgds.
          Michael

          Australia

          Comment

          Working...
          X