Announcement

Collapse
No announcement yet.

Metal Master Ironworker... FYI..

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Metal Master Ironworker... FYI..

    I've seen these mentioned on here and PM.
    While looking for a machine i went to this link
    http://www.metalmaster.ca/index.html
    I just got an email for pricing.. was sorta interested because they are "local".. well within my province anyway.
    CHOKE, GAG, SPUTTER.... The very basic machine.. $13,000
    Would have been near $20,000 Cnd with everything i'd like.
    Man... they sure are proud of THAT thing!!!
    Russ
    I have tools I don't even know I own...

  • #2
    My brother has a P-70 Piranha and it was only $16,000 new with a bunch of round punches. it punches 3/4" plate real well.

    If he were to do it again the 110 ton would have been better, it would punch 1-7/16" in 1" plate.

    http://www.piranhafab.com/p110.html

    Being able to punch 1" plate would be so handy, many times I would have to stack up plates and drill on the milling machine and that was to slow by a mile. That mill could have been doing other jobs then drillpress work.

    It seems no matter what tool you get the jobs that come through the door need a bigger machine.

    Comment


    • #3
      For $11,500 I would rather have one of these-

      http://cgi.ebay.com/NEW-75-Ton-Iroqu...QQcmdZViewItem

      Notice the wide bending brake AND a seprate flat shear,nice.
      I just need one more tool,just one!

      Comment


      • #4
        THE best...

        My opinion, Piranaha is the best..

        I got cheap and old. I am a small shop and if it had more work to make the payments I'd have better.
        Excuse me, I farted.

        Comment


        • #5
          Originally posted by David E Cofer
          My opinion, Piranaha is the best..
          I agree as long as you need a brute that loves to eat big thick plate. The Piranaha is not so great on thin stuff. It will do it but working thin plate is like tapping a keg with a .357 MAGNUM.

          Comment

          Working...
          X