No announcement yet.

1/4-32 setscrew

  • Filter
  • Time
  • Show
Clear All
new posts

  • 1/4-32 setscrew

    I am in need of 1/4-32 dog point setscrews
    about 3/8" long. I might be able to use 1/2".
    Could use as many as 2000. Thanks

  • #2
    You probably will have a hard time finding that anywhere. Try calling McMaster-Carr, they don't have it in their cataglog, but they are very good at getting whatever you need. Will 1/4-28 work? That would be much easier to find.



    • #3
      MSC has these as well, I have bought special size items through them many a time, and they will have the bulk.

      In a pinch, Fastenall has many colse outlets in all major towns and even many smaller towns - such as mine -. They can get these and other special sizes in 24 hours.
      CCBW, MAH


      • #4
        I would contact a fastener wholesaler and see if they will cut you a deal. These are a specialty item and the retailers don't cut much slack on secial orders.

        If they won't cut you a deal, you may have to buy a die and teach some out of work college grad how to make them.

        Try the yellow pages.



        • #5

          When you need "specials" contact a large fastener distributor.

          Years ago I made a product that needed a 10-24 x 3/16" binder head screw. I was told this was a non-standard item and would have to be specially made. My distributor at the time subscribed to a service which provided him with a large book (updated monthly) that listed all the overstock specials from fastener people around the country. Over a ten year period the distributor was always able to find these screws sitting on a shelf collecting dust in a warehouse somewhere. Likewise the 1/4-32 shouldn't be a problem.

          I bet the same type of listing is available to distributors on the internet now.


          • #6
            Your local fastener supplier can find them for you. As said in other post the suppliers have a network where they can find most anything if it has ever been made. My local supplier found me some stainless #5-40 nut.