Announcement

Collapse
No announcement yet.

Tailstock spindle

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    The Clausings at school and the Nardini at work both engage the tang, my little Jet 1024 doesn't. In fact I cut the tangs of my drill chuck arbors to get more travel out of the tailstock ram. Of course I got tired of spinning the arbor, so I milled a short slot in the end of the ram (radially) and put a dowell pin in the arbor. Works very well.

    Comment

    Working...
    X