Announcement

Collapse
No announcement yet.

Darex E-90 Grinder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Thrud
    replied
    There is an attachment to sharpen ball mills from Darex and taps.

    Dave

    Leave a comment:


  • Thrud
    replied
    The Village Press "The Shop Wisdom of Philip Duclos" has an article on an air spindle.

    Dave

    The Darex Spindle is really nicely made, by the way...

    Leave a comment:


  • lynnl
    started a topic Darex E-90 Grinder

    Darex E-90 Grinder

    I recently acquired a like-new Darex E90 endmill grinder. It did NOT include the spindle apparatus necessary for endmill sharpening, but the price was too good to pass up. (It does have the stylus fixture). I'd like to make some type of fixture to permit at least semi-precision grinding for such as lathe tool bits and/or drill bits. Can anyone point me toward some ideas/plans for such? ... or offer suggestions.
Working...
X