Announcement

Collapse
No announcement yet.

Chuck Mounting Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pressurerelief
    replied
    Thanks Les,

    According to the diagram an A-1 will fit an A-2 but not the inverse. That clears it up. The machine is a Haas TL-1.

    P/R

    Leave a comment:


  • LES A W HARRIS
    replied
    A1 & A2 American Lathe Spindles

    Originally posted by pressurerelief
    What is the difference between an A1-5 and an A2-5 mount? I read somewhere there is "no difference". If there is no difference why do they have separate designations?

    P/R
    A-1 Has tapped holes on both inner & outer bolt circles.

    A-2 Has tapped holes on oter bolt circle but none on the inner bolt circle.

    Lane for ref!













    Cheers,
    Last edited by LES A W HARRIS; 02-07-2009, 08:39 PM.

    Leave a comment:


  • lane
    replied
    Never heard of a A2 mount.
    http://shopswarf.orconhosting.net.nz/chuckmt.html
    May be this will help. What is it on? What kind of machine ?

    Leave a comment:


  • pressurerelief
    started a topic Chuck Mounting Question

    Chuck Mounting Question

    What is the difference between an A1-5 and an A2-5 mount? I read somewhere there is "no difference". If there is no difference why do they have separate designations?

    P/R
Working...
X