Announcement

Collapse
No announcement yet.

Looking to buy a lathe, advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • lane
    replied
    I think Acer comes out of India are is an Indian company.
    Last edited by lane; 03-10-2009, 08:20 PM.

    Leave a comment:


  • speedy
    replied
    The Indians have been making jewelry making machinery for some time, too, as India is a Huge jewelry manufacturing country- they are the world's largest buyers of gold, by far.
    Yes that is true; all the corner dairy owners and their wives n children are wearing it

    Leave a comment:


  • Alistair Hosie
    replied
    My understanding is that the Indians have improved a lot in the last 20 years with tooling etc don't suppose that would rule out lathes so whay not check it out.Alistair

    Leave a comment:


  • Ries
    replied
    Atlas, in India, makes lathes, milling machines, brand new shapers, and much much more- nail making machines, anyone?

    http://www.atlasmachinesindia.com/map.htm

    The Indians have been making jewelry making machinery for some time, too, as India is a Huge jewelry manufacturing country- they are the world's largest buyers of gold, by far.

    Fancy stuff like chainmaking machines, cnc engraving machines, and rolling mills for precious metals.

    Leave a comment:


  • Doozer
    replied
    http://engineering.indiabizclub.com/.../lathe_machine

    Leave a comment:


  • CLARKMAG
    replied
    I sold my Clausing 5914 last week.
    I ordered a PM1236 yesterday.

    I put lots of investigation into the purchase.
    I should put that effort into investing, where in the last year I have lost so much money, that the cost of the lathe is insignificant.

    Leave a comment:


  • wierdscience
    replied
    Panther makes lathes,coneheads still-
    http://www.lathes.co.uk/panther/

    As does Gujarat which still makes larger swing conehead lathes along with modern belt and gear heads.
    http://www.gujaratlathe.com/products/cpglp.htm

    I was suprised anyone was still making commercial sized coneheads.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    It all depends on your budget. Less than $1000? Get an Atlas or Craftsman, or a new Chicom 9x20. $1500? Look for a South Bend 9" in good repair. Or a new Chicom.

    I'd look at any lathe regardless of county of origin, but I would do research on models that aren't the stand-bys sold at HF, Enco, Jet, etc.

    Leave a comment:


  • speedy
    replied
    HMT (Hindustan Machine Tools ) made some good stuff. Moyes and Groves were importing and distributing the stuff when I worked there some 40years ago.
    When we opened the containers at the loading dock the call went out RUN!! .....and find a bench to stand on
    The cockroaches were numerous and huge
    Last edited by speedy; 03-10-2009, 05:36 AM.

    Leave a comment:


  • J. Randall
    replied
    Plus one on the Enterprise, I used a small one in a Vo-Tech shop and it was a pretty good little lathe. I liked it better than the SB 10L that they had. It was inch or metric and had higher spindle speeds.
    James

    Leave a comment:


  • macona
    replied
    I believe Enterprise lathes come out of india and they are pretty good.

    Leave a comment:


  • parrisw
    replied
    Originally posted by Sportandmiah
    If you're looking for something made in India that is used, you might check out Harbor Freight. They're Chinese made, but probably for the same price you can get a new lathe. It will need the usual deep clean and adjusting before use, but a great bargain regardless.
    most 10x20's around here, are $1500 min for chinese

    Leave a comment:


  • Sportandmiah
    replied
    If you're looking for something made in India that is used, you might check out Harbor Freight. They're Chinese made, but probably for the same price you can get a new lathe. It will need the usual deep clean and adjusting before use, but a great bargain regardless.

    Leave a comment:


  • Fasttrack
    replied
    Then it sounds like your in a good position to take a look at it and determine whether or not it will work for you. I'm pretty "stingy" when it comes to calling things "good". For instance, I've yet to see a South Bend that I would call "good". I call them useable, aesthetically pleasing, stylish, etc.

    Leave a comment:


  • parrisw
    replied
    Originally posted by Fasttrack
    Nope. None that I know of. I'm sure they've made useable lathes, but not good ones. That doesn't mean you shouldn't go look at it or that it won't serve your purposes, but don't think India is a sign of quality by any means. Sounds like your average import machine. I wouldn't spend very much on it, if I were in your shoes.

    Notice that these threads come up often on the board and cause lots of argument. A recent thread regarding import vs American machines is right here:
    http://bbs.homeshopmachinist.net/showthread.php?t=33669
    Thanks, I've used Chinese ones with great results, you just have to know what your limitations are. I'm not machining anything huge, mostly small parts. I don't have lots of $$$$ to spend on a good old american iron.

    Leave a comment:

Working...
X