Announcement

Collapse
No announcement yet.

My DRO installation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • My DRO installation







    Meiser DRO S2000, glass scales, very nice.
    Hardest part was the Y axis mount, had to cut an angle on it to match the casting of the base.

  • #2
    Bill;

    Looks like a nice job.

    Just a reminder, make sure the x-scale does not touch the mill column when the Y axis is all the way back.

    Outback
    So much to learn, so little time

    Comment


    • #3
      Originally posted by outback
      Bill;

      Looks like a nice job.

      Just a reminder, make sure the x-scale does not touch the mill column when the Y axis is all the way back.

      Outback
      There is plenty of clearence

      Comment

      Working...
      X