Announcement

Collapse
No announcement yet.

Ned help in finding a tabbed washer...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • lane
    replied
    Any good bearing supply house will have them. They are called N washers and are used with wo nuts.

    Leave a comment:


  • lakeside53
    replied
    Perfect. They have exactly what I'm looking for.. their PW or PWT series.

    many thanks.

    Leave a comment:


  • RobbieKnobbie
    replied
    We purchase the nuts/washers you're talking about (or similar) from Whittet-Higgins...

    http://www.whittet-higgins.com/

    Leave a comment:


  • hitnmiss
    replied
    Check out:

    http://www.seastrom-mfg.com/

    Leave a comment:


  • saltmine
    replied
    The company is Dorman/Motormite. And they do have a web-site.
    If they don't have it, you'll probably have to make one.

    Leave a comment:


  • winchman
    replied
    I was looking for some a while back, and found them in the auto parts store. I can't remember the name of the company that sells small packages of miscellaneous parts on carousels in the parts stores, but that's where I found them.

    I think they have a website, too.

    Roger

    Leave a comment:


  • lakeside53
    started a topic Ned help in finding a tabbed washer...

    Ned help in finding a tabbed washer...

    Pretty much says it all.

    These are the washers that you bend up a tab into a slot in the nut. As best I can tell, Mcmaster does not have them... they have tabbed lock washers but those are different. I need to replace some on a old machines so OEM isn't an option.
    Last edited by lakeside53; 03-16-2009, 03:43 PM.
Working...
X