Announcement

Collapse
No announcement yet.

Another Beaver mill question.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Another Beaver mill question.

    The table feed on my new machine was missing. My first thought was to adapt a new unit to one end of the table. I figure before I jump in with both feet I should ask around on the availability of the original part.

    So to the UK members. What's the rough cost and availability on a table power feed unit for a Beaver VBRP? This mill has the offset ways on top of the knee.

    Will the UK part even work on the US machine?

    Thanks.
    Brett Jones...

  • #2
    they've all gone to bed mate ..and me too in a min, it's 2:35 am here .

    all the best.markj

    Comment


    • #3
      A working one WITH the rapid working is like hens teeth, shipping would be a bitch as well, probably far out weighing getting a servo type.

      .
      .

      Sir John , Earl of Bligeport & Sudspumpwater. MBE [ Motor Bike Engineer ] Nottingham England.



      Comment


      • #4
        That was the assumption I was work with John, but I figured I'd ask before I started fitting something generic to the machine.

        Thanks.
        Brett Jones...

        Comment

        Working...
        X