No announcement yet.

Idea machine work light?? off the shelf at HF

  • Filter
  • Time
  • Show
Clear All
new posts

  • Idea machine work light?? off the shelf at HF

    Like $25 currently, 120vac input.. one on each side my mill head would probably be just fine with me. NO building, no work.. is 120 vac on a machine thou, use a GFCI..
    Excuse me, I farted.

  • #2
    270 Lumens? Thats a little more light output than HALF a 40 watt light bulb. In other words, not much. Can't beat the price however.
    James Kilroy


    • #3
      What I like most about these new LED Bulbs is very very little Heat.
      Especially with work lights where I can be directly under them.
      My old Halogen Lamp on the Lathe, can be a real cooker.

      A lot of earlier Bulbs had a Blue Cast that I did not like, however, recently I replaced my chandelier bulbs with "Warm White" LED's. Looks great with only a slightly lower overall brightness, but, with a greater than 90% power savings!

      As a bonus, I'm thinking that some of these can be repaired should a LED go out. Typically though, I think LED's tend to just get dimmer and dimmer over time.

      I do notice that the Blue Cast Bulbs make my complexion look younger, so I need to use a whole butt load of them.

      Tom M.